Mechanical
William
P. Bahnfleth, P.E., Ph.D.
Professor
Industry Experience: U.S. Army Construction Engineering Research Laboratory; ZBA Inc. Engineers/Consultants.
Professional Affiliations: ASHRAE, ASME, IDEA, Sigma Xi
Research Areas: district energy systems, chilled water plant design and operation, stratified chilled water thermal storage, earth coupled heat transfer, indoor air quality.
James D.
Freihaut, Ph.D.
Associate Professor
Industry Experience: United Technologies Research Center.
Professional Affiliations: American Chemical Society, ASHRAE, Fuel Chemistry Division of American Chemical Society, Society of the Sigma Xi, Air and Water Management Association, Environmental Chemistry Division of American Chemical Society, Member, Board of Directors, National Association of Indoor Environmental Professionals.
Research Areas: indoor air quality and building science, enclosed space air quality issues, system constraints on air treatment/filtration solutions.
Moses D.F. Ling, P.E., R.A., M.S.
Associate Professor
Consulting Experience: Leo A. Daly Co., DC; Ellerbe-Beckett, DC; Cannon Design, Grand Island, New York; Parfitt/Ling, State College, PA.
Professional Affiliations: ASHRAE, NFPA
Stanley
A. Mumma, Ph.D., P.E.
Professor Emeritus
Industrial Experience: General Motors Corporation (1962-1969); U.S. Army Construction Engineering Research Laboratory (1969-1974).
Professional Affiliations: Sigma Xi. ASHRAE: College of Fellows; Learning Institute Trustee; Vice Chair, TC 4.12, Total Bldg. Design; TC 6.7, Solar.
Research Areas: dedicated outdoor air systems (DOAS), radiant cooling, simulation and optimization of building mechanical components and systems, direct digital controls, solar thermal.
Jelena
Srebric, Ph.D.
Associate Professor
Consulting Experience: ASHRAE, GA; University of Michigan, College of Architecture + Planning, MI; Sear-Brown, PA; FabFlow, NH.
Professional Affiliations: ASHRAE - Member, TC 4.10 Indoor Environmental Modeling, TC 5.3 Room Air Distribution.
Research Areas: indoor air quality, ventilation and air distribution systems, simulations and measurements of indoor parameters, computational fluid dynamics (CFD) for building design, pollutant distribution by zonal modeling, building energy analysis, low energy cooling strategies.