New Science and Technology Center
Chestnut Hill Academy  
Philadelphia, PA  
David Klug - Thesis Research
 

•ANSI/ASHRAE Standard 62.1-2007.  Ventilation for Acceptable Indoor Air Quality.  American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.  Atlanta, GA.

•ANSI/ASHRAE/IESNA Standard 90.1-2007.  Energy Standard for Buildings Except Low-Rise Residential Buildings.  American Society of Heating, Refrigerating and Air-Conditioning Engineers.  Atlanta, GA.

•Chestnut Hill Academy New Science & Technology Center Construction Documents.  Lilley Dadagian Architects.  Lexington, MA

•DiversiFoam Products. ASTM C 578-95 specifications for rigid cellular polystyrene thermal insulation. Rockford, MN  http://www.diversifoam.com/cfproperties.htm

•Electric Service Tariff.  Electric Service Tariff.  PECO Energy Company.  Philadelphia, PA.

•Gas Service Tariff.  Gas Service Tariff.  Philadelphia Gas Works.  Philadelphia, PA.

•Trace 700 Analysis Program.  Trane. http://www.trane.com/Commercial/Dna/View.aspx?i=1136

•USGBC.  LEED for New Construction & Major Renovations.  Version 2.2.  October 2005.  Washington, DC.

•Ryan Fitzpatrick, E.I.T.  Mechanical Project Engineer.  Bruce E. Brooks & Associates.  2209 Chestnut St.  Philadelphia, PA.

•Humidity Control Design Guide for Commercial and Institutional Buildings.  Harriman, Brundrett, Kittler.  2001, ASHRAE

•Heating, Ventilation, and Air Conditioning Analysis and Design, 6th Edition.  McQuiston, Parker, Spitler.  2006, John Wiley & Sons, Inc.

•Architectural Acoustics.  Marshal Long.  2006, Elsevier.

•Catalog of STC and IIC Ratings for Wall and Floor/Ceiling Assemblies.  Russell B. DuPree.  Office of Noise Control, California Department of Health Services.

•CALMAC First Pass.  Version 0501018NAEZ

 

 

Note: While great efforts have been taken to provide accurate and complete information on the pages of CPEP, please be aware that the information contained herewith is considered a work‐in‐progress for this thesis project. Modifications and changes related to the original building designs and construction methodologies for this senior thesis project are solely the interpretation of Dave Klug. Changes and discrepancies in no way imply that the original design contained errors or was flawed. Differing assumptions, code references, requirements, and methodologies have been incorporated into this thesis project; therefore, investigation results may vary from the original design.

 
This page was last updated on 9-11-08, by Dave Klug and is hosted by the AE Department ©2008
 
Senior Thesis Penn State AE Home AE Labs Contact