Justin Herzing
Building Statistics
Technical Assignments

Technical Report 2

Technical Report 2 contains a block load energy model for both Buildings A and B.  A source emissions analysis was also performed for the utilities consumed.

Click here to view full pdf

Click here to view executive summary

The load analysis and energy model were created using Trane TRACE.
The source pollution data was gathered from the National Renewable Energy Laboratory emission factors.
 
|
|
|
|
|
|
 
Note: While great efforts have been taken to provide accurate and complete information on the pages of CPEP, please be aware that the information contained herewith is considered a work‐in‐progress for this thesis project. Modifications and changes related to the original building designs and construction methodologies for this senior thesis project are solely the interpretation of Justin Herzing. Changes and discrepancies in no way imply that the original design contained errors or was flawed. Differing assumptions, code references, requirements, and methodologies have been incorporated into this thesis project; therefore, investigation results may vary from the original design
 
This page was last updated on April 26, 2010, by Justin Herzing and is hosted by the AE Department ©2009