Justin Herzing
Building Statistics
Technical Assignments
 

Thesis Report References

Administration, E. I. (n.d.). Energy Star. Retrieved October 25, 2009, from http://www.energystar.gov/ia/business/tools_resources/new_bldg_design/2003_CBECSPerformanceTargetsTable.pdf

Agency, I. E. (2008, February). International Energy Agency. Retrieved December 6, 2009, from www.iea.org (Douglas, 2010)


ANSI/ASHRAE. (2007). Standard 62.1 - 2007, Ventilation for Acceptable Indoor Air Quality. Atlanta, GA: American Society of Heating Refrigeration and Air Conditioning Engineers, Inc.


ANSI/ASHRAE. (2007). Standard 90.1 - 2007, Energy Standard for Buildings Except Low-Rise Residential Buildings. Atlanta, GA: American Society of Heating Refrigeration and Air Conditioning Engineers, Inc.


ASHRAE. (2005). Handbook of Fundamentals. Atlanta: ASHRAE.


Center, M. C. (2003, September). Houston Advanced Research Center. Retrieved December 11, 2009, from http://files.harc.edu/Sites/GulfCoastCHP/Publications/ResourceGuide.pdf


Council, U.S. (2009). LEED 2009 for New Construction and Major Renovations. Washington, D.C: United States Green Building Council, Inc.


Douglas, H. (2010). Hunter Douglass. Retrieved March 9, 2010, from http://www.hunterdouglas.com/


Energy, G. (2007). GE Energy. Retrieved April 16, 2010, from http://www.gepower.com/prod_serv/products/recip_engines/en/downloads/type6_usver.pdf


Fischer, S. (2004, June). ASHRAE. Retrieved December 5, 2009, from ASHRAE: www.ashrae.org


Kavanaugh, S. (2009, October). ASHRAE. Retrieved December 5, 2009, from ASHRAE Journal: www.ashrae.org (Energy, 2007)

Torcellini, M. D. (June 2007). Source Energy and Emission Factors for Energy Use in Buildigns. Golden, Colorado: National Renewable Energy Laboratory.


Program, I. T. (2006, January). Department of Energy. Retrieved December 4, 2009, from http://www1.eere.energy.gov/industry/bestpractices/pdfs/steam20_turbogenerators.pdf     

                 
Zogg, R., Roth, K., & Brodrick, J. (2005, September). ASHRAE. Retrieved December 6, 2009, from ASHRAE: www.ashrae.org

 
 
|
|
|
|
|
|
 
Note: While great efforts have been taken to provide accurate and complete information on the pages of CPEP, please be aware that the information contained herewith is considered a work‐in‐progress for this thesis project. Modifications and changes related to the original building designs and construction methodologies for this senior thesis project are solely the interpretation of Justin Herzing. Changes and discrepancies in no way imply that the original design contained errors or was flawed. Differing assumptions, code references, requirements, and methodologies have been incorporated into this thesis project; therefore, investigation results may vary from the original design
 
This page was last updated on April 26, 2010, by Justin Herzing and is hosted by the AE Department ©2009