Senior Thesis e-Studio             Penn State University               Architectural Engineering          AE Labs Home         Contact Jonathan Nelson

This page was last updated on 23 April 2009 by Jonathan Nelson and is hosted by the AE Department ©2009

DISTRICT OF COLUMBIA YOUTH CENTER

 

LAUREL, MD

Jonathan Nelson Construction Management

Thesis Resources

Bradshaw, J. C. (2003). Protecting Personnel at Risk: DOD Writes Anti-Terrorism Standards to Protect People in Buildings. AMPTIAC Quaterly , 11-15.

Cargile, J., O'Neil, E. F., & Neely, B. D. (2003). Very-High-Strength Concretes for Use in Blast-and-Penetration-Resistant Structures. APMTIAC Quaterly , 61-66.

Coltharp, D., & Hall, R. (2003). Blast Retrofit Research and Development: Protection for Walls and Windows. AMPTIAC Quaterly , 31-37.

Federal Emergency Management Agency. (2007, October 19). FEMA E155- Building Design for Homeland

Security Course. Retrieved February 2009, from FEMA :

http://www.fema.gov/plan/prevent/rms/rmsp155.shtm

Federal Emergency Management Agency. (2003). Primer for Design of Commercial Buildings to Mitigate

Terrorist Attacks. District of Columbia, Washigton: FEMA.

Hinman, E. (2009, Febuary 2). Blast Safety of the Building Envelope. Retrieved March 2009, from Whole

Building Design Guide: http://www.wbdg.org/resources/env_blast.php?r=envelope

Lane, R., & Craig, B. (2003). Material Ease - Materials for Blast and Penetration Resistance. AMPTIAC Quaterly , 39-45.

Lindsey, P. (20003). DOD Protective Desgn Manuals Have Wide Application. AMPTIAC Quaterly , 17-24.

Odello, R. (2003). Polymer Composite Retrofits Strengthen Concrete Structures. AMPTIAC Quaterly , 25-29.

Porter, J., Dinan, R., Hammons, M., & Knox, K. (2003). Polymer Coatings Increase Blast Resistance of Existing and Temporary Structures. AMPTIAC Quaterly , 47-52.

Smilowitz, R. (2008, May 12). Designing Buildings to Resist Explosive Threats. Retrieved February 2009,

from Whole Building Design Guide: http://www.wbdg.org/resources/resistexplosivethreat.php

Walton, B. (2003). Designing Blast Hardened Structure for Military and Civilian Use. AMPTIAC Quaterly ,53-59.

Warner, S. M. (2005). The Effective Use of New Materials and Methodologies for Blast Mitigation in New and Renovated Facilites by the Armed Forces. Fort Leavenworth, KA: US Army Command and General Staff College.