Technology and Engineering Development (TED) Building

Thomas Jefferson National Accelerator Facility

Newport News, VA

David Blum | Mechanical Option | Architectural Engineering | The Pennsylvania State University

Courtesy of EwingCole

| Home | Biography | Building Statistics | Abstract | Technical Assignments | Research | Proposal | Presentation | Final Report | Reflection | Senior Thesis e-Studio |



Tech Report I

Tech Report II

Tech Report III

Technical Assignments

Tech Report I analyzes the compliance of the TED mechanical system and building construction with ASHRAE Std. 62.1-2007 and ASHRAE Std. 90.1-2007.

Tech Report II describes the results of a block load model and energy simulation and compares these results to actual design values.

Tech Report III presents an overview of the designed mechanical system that includes design parameters and requirements, the first cost, design loads, operation descriptions and schematics, annual energy use and associated operational costs, a LEED analysis, and an evaluation.


Note: While great efforts have been taken to provide accurate and complete information on the pages of CPEP, please be aware that the information contained herewith is considered a work‐inprogress
for this thesis project. Modifications and changes related to the original building designs and construction methodologies for this senior thesis project are solely the interpretation of David Blum. Changes and discrepancies in no way imply that the original design contained errors or was flawed. Differing assumptions, code references, requirements, and methodologies have been incorporated into this thesis project; therefore, investigation results may vary from the original design.

Senior Thesis e-Studio | Penn State | AE | AE Computer Labs | Jefferson Lab | EwingCole | Contact

This page was last updated on 11/28/2010, by David Blum and is hosted by the AE Department ©2010