Catholic University of America

Father O'Connell Hall Renovation

Washington, DC

Kevin Andreone | Mechanical Option | Penn State Architectural Engineering




Technical Report One

The purpose of technical report one is to evaluate The Catholic University of America’s Father O’Connell Hall Renovation is in compliance with ASHRAE Standards 62.1-2010, Sections 5 and 6, and Standard 90.1-2010.






Technical Report Two

The purpose of this report is to estimate and analyze Father O’Connell’s load and energy consumption.








Technical Report Three

The purpose of this report is to evaluate existing mechanical systems at Father O'Connell Hall. An overall evaluation was performed on the mechcanical design in order to determine potential improvements.


Note: While great efforts have been taken to provide accurate and complete information on the pages of CPEP, please be aware that the information contained herewith is considered a work‐in‐progress for this thesis project. Modifications and changes related to the original building designs and construction methodologies for this senior thesis project are solely the interpretation of Kevin Andreone. Changes and discrepancies in no way imply that the original design contained errors or was flawed. Differing assumptions, code references, requirements, and methodologies have been incorporated into this thesis project; therefore, investigation results may vary from the original design.
This page was last updated on December 15, 2013, By Kevin Andreone and is hosted by the AE Department ©2013