Daniel Peter Donecker
|| STRUCTURAL | 35 WEST 21ST STREET | NEW YORK, NY||
| HOME | STUDENT BIO | BUILDING STATISTICS | THESIS ABSTRACT | TECH ASSIGNMENTS | RESEARCH |
| THESIS PROPOSAL | PRESENTAION | FINAL REPORT | REFLECTION | eSTUDIO |
 
 

 

User Note >
Note: While great efforts have been taken to provide accurate and complete information on the pages of CPEP, please be aware that the information contained herewith is considered a work‐in‐progress for this thesis project. Modifications and changes related to the original building designs and construction methodologies for this senior thesis project are solely the interpretation of Daniel Donecker. Changes and discrepancies in no way imply that the original design contained errors or was flawed. Differing assumptions, code references, requirements, and methodologies have been incorporated into this thesis project; therefore, investigation results may vary from the original design.

 

 
 
 

 

|WELCOME TO DANIEL P. DONECKER'S PORTFOLIO

 

 

Final Report:

The goal of this report is to optimize the existing design of 35W 21ST Street. Several building systems with evaluated and redesigned in order to add an extra floor to the building without increasing the overall height and effecting the architecture of the building. The following items were addressed:

- Lateral load resisting system

-Gravity load system

-Architectural floor plans

-HVAC system for individual apartments

The full report can be accessed by clicking the link below

FINAL REPORT

 

 

 

 

 

 

 

 

 

 

The Capstone Project Electronic Portfolio (CPEP) is a web-based project and information center. It contains material produced for a year-long Senior Thesis class. Its purpose, in addition to providing central storage of individual assignments, is to foster communication and collaboration between student, faculty consultant, course instructors, and industry consultants. This website is dedicated to the research and analysis conducted via guidelines provided by the Department of Architectural Engineering. For an explanation of this capstone design course and its requirements, visit AE Thesis.

 

 

 
 
 This Page was last updated on September 5, 2008 By Daniel Donecker, and is hosted by the AE Department © 2005