Header

Thesis Research

HVAC Resources

ANSI/ASHRAE. (2004). Standard 55 – 2004, Thermal Environmental Conditions for Human Occupancy. Atlanta, GA: American Society of Heating Refrigeration and Air Conditioning Engineers, Inc.
ANSI/ASHRAE. (2007). Standard 62.1 – 2007, Thermal Environmental Conditions for Human Occupancy. Atlanta, GA: American Society of Heating Refrigeration and Air Conditioning Engineers, Inc.
ANSI/ASHRAE. (2007). Standard 90.1 – 2007, Thermal Environmental Conditions for Human Occupancy. Atlanta, GA: American Society of Heating Refrigeration and Air Conditioning Engineers, Inc.
ASHRAE. (2005). Handbook of Fundamentals. Atlanta, GA: American Society of Heating Refrigeration and Air Conditioning Engineers, Inc.

Double Skin Facade
Fuliotto, R., Cambuli F., Mandas N., Bacchin N., Manara G., Chen Q.  2009.  “Experimental and numerical analysis of heat transfer and airflow on an interactive building façade,” Proc. of Energy and Buildings 2010, Vol. 42, pp. 23-28.
Pappas, A., Zhai Z.  2007.  “Numerical investigation on thermal performance and correlations of double skin façade with buoyancy-driven airflow,” Proc. of Energy and Buildings 2007, Vol. 40, pp. 466-475.
Manz, H., Frank, T.  2005.  “Thermal simulation of buildings with double-skin facades,” Proc. of Energy and Buildings 2005, Vol. 37, pp. 1114-1121
Gan, G.  2001.  “Thermal transmittance of multiple glazing:  computational fluid dynamics prediction,” Proc. of Applied Thermal Engineering 2001, Vol. 21, Issue 15, pp. 1583-1592

Chilled Beam Research

Rumsey, P. Bulger, N. Wenisch , J. et. al. “Chilled Beams in Laboratories: Key Strategies to ensure effective design, construction, and operation.” Labs for the 21st Century. http://www.labs21century.gov/pdf/bp_chilled-beam_508.pdf

Mumma, S. Jeong, J.W. “Designing a Dedicated Outdoor Air System with Ceiling Radiant Cooling Panels.” ASHRAE Journal October 2006. http://doas.psu.edu/Design_DOAS_CRCP_fall_06_Journal.pd
Mumma, Stanley, PhD, PE. “Dedicated Outdoor Air Systems.”February 2001. The Pennsylvania State University DOAS. http://doas.psu.edu

Mumma, Stanley, PhD, PE. “Designing Dedicated Outdoor Air Systems.”ASHRAE Journal 43.5 (2001): 28-31.

Semco Inc, Columbia MO. “Chilled Beams & Pinnacle Application Guide.” Pages 1-34.

Semco Inc, Columbia MO, ExSel Air Design Selection Tool for Chilled Beams, software tool.
Krueger by Halton, http://www.krueger-hvac.com/ecatalog/category.aspx?refid=215

Wind Turbines
Wilson, A.  2009.  “The Folly of Building Integrated Wind.”  Environmental Building News.  Volume 18.  Issue 5.   http://www.buildinggreen.com/auth/article.cfm/2009/4/29/The-Folly-of-Building-Integrated-Wind/
Swift Wind Turbines, www.swiftwindturbines.com
AeroVironment Inc., www.avinc.com
American Wind Energy Association, www.awea.org
National Wind Technology Center:  National Renewable Energy Laboratory, www.nrel.gov/wind

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:

While great efforts have been taken to provide accurate and complete information on the pages of CPEP, please be aware that the information contained herewith is considered a work-in-progress for this thesis project. Modifications and changes related to the original building designs and construction methodologies for this senior thesis project are solely the interpretation of Sara Pace. Changes and discrepancies in no way imply that the original design contained errors or was flawed. Differing assumptions, code references, requirements, and methodologies have been incorporated into this thesis project; therefore, investigation results may vary from the original design.