Butler Memorial Hospital

New Inpatient Tower
Butler, PA

Matthew S. Geary
Mechanical Option

Student Bio
Building Statistics
Final Report
Thesis e-Studio

American Institute of Steel Construction, Inc. “Tables for the General Design and Specifications of Materials.” AISC Manual: 3-14 : 3-18.

ASHRAE 2008. “2008 Fundamentals.” ASHRAE, Atlanta.

Barnet B.. “Chilled Beams for Labs: Using Dual Energy Recovery.” ASHRAE Journal. (December,2008).

Jeong, PhD, Jae-Wong. “Designing a Dedicated Outdoor Air System with Ceiling Radiant Cooling Panels.” ASHRAE Journal (October 2006): 56-66.

Justin, Thomas. “Chilled Beams are Cool”. Design and Architecture. (11/5/05).

Mumma, Stanley, PhD, PE. “Dedicated Outdoor Air Systems.”February 2001. The Pennsylvania State University DOAS. 7 Dec. 2010 http://doas.psu.edu

Mumma, Stanley, PhD, PE. “Designing Dedicated Outdoor Air Systems.”ASHRAE Journal 43.5 (2001): 28-31.

National Fire Protection Association. “National Electrical Code Handbook 2008.”

“RS Means 2007”. Reed Construction Data, Inc. Kingston, MA. 2007.

Semco Inc, Columbia MO. “Chilled Beams & Pinnacle Application Guide.” Pages 1-34.

Semco Inc, Columbia MO, ExSel Air Design Selection Tool for Chilled Beams, software tool.



Note: While great efforts have been taken to provide accurate and complete information on the pages of CPEP, please be aware that the information contained herewith is considered a work‐in‐progress for this thesis project. Modifications and changes related to the original building designs and construction methodologies for this senior thesis project are solely the interpretation of Matt Geary. Changes and discrepancies in no way imply that the original design contained errors or was flawed. Differing assumptions, code references, requirements, and methodologies have been incorporated into this thesis project; therefore, investigation results may vary from the original design.

Senior Thesis Home

This page was last updated on 04/05/2011 by Matthew Geary and is hosted by the AE Department ©2010