|
-- Technical Report 1 --
Technical Report 1 is an in-depth analysis of the conditions under which the project is constructed and the scope of work. Thorough investigation of the construction features such as the project schedule, building systems, site conditions, and cost data were evaluated to provide a higher level of understanding the entirety of the project conditions. |
|
| |
|
|
|
-- Technical Report 2 --
Technical Report 2 is an analysis of the key features of the project that affect project execution. Evaluation of the project's detailed schedule, detailed structural & assemblies MEP estimates, site layout planning, general conditions, constructability challenges, and BIM uses were completed to generate this report.
|
|
| |
|
| |
|
-- Technical Report 3 --
Technical Report 3 is a report used to identify areas of the Mary J. Drexel project that are good
candidates for research, alternative methods, value engineering, and schedule compression. In order to
identify the key candidates for research, careful analysis of potential acceleration scenarios, value
engineering, and applications of critical industry issues were completed.
|
|
| |
|
| |
|
|
|
|
|
| Note: While great efforts have been taken to provide accurate and complete information on the pages of CPEP, please be aware that the information contained herewith is considered a work-in-progress for this thesis project. Modifications and changes related to the original building designs and
construction methodologies for this senior thesis project are solely the interpretation of Gjon Tomaj. Changes and discrepanciesin no way imply that the original design contained errors or was
flawed. Differing assumptions, code references, requirements, and methodologies have been
incorporated into this thesis project; therefore, investigation results may vary from the original
design. |
|
| |
|
This page was last updated on December 2, 2013 by Gjon Tomaj and is hosted by the AE Department ©2013
|
|
|
